Wacker Neuson ET16 - Canopy;Cabin Nameplate; Nameplate for FOPS-Screen Category I; Nameplate for FOPS-Screen Category II

3-8 BA ET16 de* 1.0 * et16e300.fm
3 Introduction
Canopy/cabin nameplate
The type label is located on the B pillar on the left.
Nameplate for FOPS-screen category I
The type label is located inside the light cover on the left.
Nameplate for FOPS-screen category II
The type label is located on the right-hand side of the protective screen.
Fig. 6
Fig. 7
Fig. 8