BA ET16 de* 1.0 * et16b510.fm 5-47
Operation 5
Working with the falling force by lowering the attachment
Do not use the falling force of the attachment as a hoe, hammer or pile-
driver.
Working with the falling force by lowering the machine
Do not use the dead weight of the machine for work.
Use the force of the hydraulic cylinders exclusively.
Fully lowering the stabilizer blade
Apply the full weight of the machine over the entire width of the stabilizer
blade when using it for stabilization.
Protecting the stabilizer legs/blade against shocks
The dozer blade or dozer blade cylinder can be damaged if the dozer
blade hits against obstacles.
To Next Page
Loading...
