Wacker Neuson ET16

7-18 BA ET16 de* 1.0 * et16w700.fm
7 Maintenance
Removing
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Connect plug A on the right next to the seat.
3. Hook up the lifting gear to the cabin lifting lugs B – see chapter “
Crane-lifting” on page 6-5.
4. Loosen the rear cabin screws C.
5. Loosen screws D and remove the strip E.
A
Fig. 220
Fig. 221
BB
Fig. 222
C
Fig. 223
D
E