4-42 BA E19 en* 1.0 * E19_10_400.fm
4 Putting into operation
Warm-up phase of vehicle
After the engine has started, allow it to warm up at slightly increased idling
speed until it reach
es its operating temperature of about 80°C (176°F) (coolant).
However, do not let the machine warm up at standstill.
During the warm-up phase, check for unusual noise, exhaust color, leaks,
malfunctions or damage.
In case of malfunctions, damage, or leaks:
Secure the vehicle, park it and find out the cause for the damage and
have it repaired.
Fold up the control lever base after shutting off G the engine.
Auto stop
The Auto Stop function shuts the engine down in certain conditions to
reduce emissions and to save fuel.
Press and hold F3 button on the Jog Dial until the corresponding screen
display appears.
The Auto Stop function cannot be executed under certain operating
conditions. A strike-through symbol then appears in the display.
l
Auto stop Indication
Function on
The Auto Stop function is con-
trolled automatically.
1
1. The Auto Stop function is activated only when the joystick base is raised.
The Auto Stop function cannot
be executed.
Function off
The Auto Stop function is turned
off.
To Next Page
Loading...
