Wacker Neuson ET42

5-28 BA E19 en* 1.0 * E19_10_510.fm
5 Operation
Hammer return line
The valve for switching between excavator- and hammer operation is
located under the right maintenance cover.
NOTICE
Possible machine damage from incorrect lever position.
► The hammer operation is only possible via the auxiliary hydraulics
(AUX I).
Fig. 155
1
2
Lever position Function
1 Excavator operation
2 Hammer operation
Fig. 156
A
Hammer operation Position
On
Pressbutton A at the rear on the right
joystick and hold
Off Release push button A