Wacker Neuson ET42

5-50 BA E19 en* 1.0 * E19_10_510.fm
5 Operation
➥ Check pin D must be fully extended.
5. Retract the bucket cylinder.
6. Set down the attachment.
7. Raise the boom.
8. Hook up the quick coupler system E in bolt F of the attachment
receptacle.
9. Extend the bucket cylinder so that pin G of the attachment touches the
quickhitch.
10.Check whether the attachment touches the quickhitch with the second
pin G.
Fig. 205
D
Fig. 206
Fig. 207
G
E
F