BA E19 en* 1.0 * E19_10_510.fm 5-59
Operation 5
Release the pressure AUX I/II
1. Stop the vehicle on firm, level, and horizontal ground.
2. Lower the attachment completely to the ground.
3. Lower the stabilizer blade to the ground.
4. Press switch A in the right switch panel.
During the pressure release, if an additional control circuit is actuated, the
display appear alternately and a buzzer sounds.
Removed attachments with hydraulic connections must not be stored in
sunlight to ensure pressure does not build in the lines.
Clean the hydraulic quick couplers before connecting to ensure dirt does
not penetrate the hydraulic system.
Pressure relief Indication
On
Off
Fig. 219 (symbolic representation)
To Next Page
Loading...
