5-60 BA E19 en* 1.0 * E19_10_510.fm
5 Operation
Release the pressure of the work hydraulics
1. Stop the vehicle on firm, level, and horizontal ground.
2. Lower the attachment completely to the ground.
3. Lower the stabilizer blade to the ground.
4. Stop the engine.
5. Turn the starting key to position 1.
6. Lower the control lever base.
7. Release the pressure:
➥ Work hydraulics: Move the control elements of the respective
hydraulic circuit several times in all directions and hold each time as far
as it will go for three seconds.
To Next Page
Loading...
