7-32 BA E19 en* 1.0 * E19_10_700.fm
7 Maintenance
Empty the water separator (prefilter)
1. Preparations – see chapter “ Parking the machine” on page 5-11.
2. Prepare a suitable container for collecting the fuel/water mixture.
3. Open the engine cover.
4. Connect a suitable hose to connection A.
5. Open screw B.
6. Loosen bleed screws C.
7. Drain the fuel-water-mixture in the container.
8. Tighten bleed screws C.
9. Tighten the screw B if nothing but fuel is flowing into the receptacle.
10.Remove the hose.
11.Close and lock the engine cover.
Use a suitable container to collect fluids and lubricants as they flow out
and dispose of them in an environmentally friendly manner.
To Next Page
Loading...
