BA E19 en* 1.0 * E19_10_700.fm 7-33
Maintenance 7
Empty the water separator (main filter)
1. Preparations – see chapter “ Parking the machine” on page 5-11.
2. Prepare a suitable container for collecting the fuel/water mixture.
3. Open the engine cover.
4. Connect a drain hose to connection A. Place the hose into a container
on the ground.
5. Open screw B.
6. Drain the fuel-water-mixture in the container.
7. Tighten the screw B if nothing but fuel is flowing into the receptacle.
8. Remove the hose.
9. Close and lock the engine cover.
Use a suitable container to collect fluids and lubricants as they flow out
and dispose of them in an environmentally friendly manner.
To Next Page
Loading...
