wc_tx003101gb.fm
63
LTN 6K/8K-V Maintenance
6.5 Checking the Engine Oil
Requirements
Park the machine on a level surface
Shut down the machine
When
Every 10 hours of service or daily
Procedure
Perform the procedure below to check the engine oil.
1. Clean around the dipstick (a).
2. Extract the dipstick and check the oil level. Maintain the oil level between the
two markings on the dipstick.
3. Remove the oil filler cap (b) and add oil as needed. When full, the oil level will
reach the upper mark on the dipstick (c).
NOTICE: Do not overfill the machine with oil. Overfilling the engine with oil may
lead to excessively high operating temperatures.
4. Reinstall the oil filler cap after adding oil.
wc_gr011091
a
b
To Next Page
Loading...
