wc_tx003101gb.fm
67
LTN 6K/8K-V Maintenance
Continued from the previous page.
4. Open the radiator drain cock (b) and let the coolant drain into the container.
5. Open the engine block coolant drain cock (c) and let the remaining coolant drain
into the container.
6. Close both drain cocks.
7. Inspect the radiator filler cap and seal, hoses, clamps and plugs for damage.
Replace any damaged parts.
8. Fill the radiator to approximately 19 mm (3/4 in.) below the bottom of the filler
neck.
NOTICE: Do not overfill the radiator. The machine will be damaged.
9. Clean and reinstall the radiator filler cap.
Result
The radiator has now been flushed.
WARNING
Burn hazard. Coolant can contain alkali.
f Avoid contact with skin and eyes.
c
b
wc_gr009990
To Next Page
Loading...
