Wacker Neuson LTV6L User Manual

wc_tx004430gb_FM10.fm
45
LTV Machine Setup
Continued from the previous page.
Reference
graphic
Procedure Perform the procedure below to raise the tower.
NOTICES ■ Do not attempt to raise the tower if the winch is damaged or not operating
properly, or if the winch cables are worn or damaged.
■ The tower and light bar can be rotated 360°. If you wish to position the light bar
so the lights illuminate to the left, to the right, or to the rear, the light bar should
be rotated when the tower is fully lowered. See topic Manually Rotating the Light
Bar.
Raising the
tower
1. Check the operation of the telescoping winch (a) by rotating its handle 1/4 turn
clockwise (“cable in” direction). The winch pawl must engage the winch gear
teeth. When operating properly, the winch pawl will make a “clicking” sound
when its handle is rotated clockwise.
2. Continue rotating the winch handle until the tower is at the desired height. Do
not overcrank the winch when the tower is fully extended.
wc_gr013770
a

Wacker Neuson LTV6L Specifications

General

Brand	Wacker Neuson
Model	LTV6L
Category	Work Light
Language	English