wc_tx004431gb_FM10.fm
56
Operation LTV
5.5 Machine Monitoring – DeepSea
Description
Engine and generator information is displayed on the the LCD panel The user can
scroll through the screens to monitor machine parameters.
Volts “V”- Displays the AC output voltage being produced by the
generator.
Volts “V”- Displays the AC output voltage being produced by the
generator.
Hertz “Hz” - Displays output frequency. This gauge should read
approximately 60 Hz under a no-load condition. If the frequency
is too high, check the engine rpm.
Displays the engine rpm.
Displays the metered usage of the machine in hours (h) and
minutes (m).
To Next Page
Loading...
