wc_tx004457gb_FM10.fm
82
General Maintenance LTV
7.6 Maintaining the Battery
Safety
precautions
Observe the following safety precautions to prevent serious damage to the
electrical system.
■ Do not disconnect the battery while the machine is running.
■ Do not attempt to run the machine without a battery.
■ Do not attempt to jump-start the machine.
■ In the event that the machine has a discharged battery, either replace the
battery with a fully charged battery or charge the battery using an appropriate
battery charger.
■ Dispose of waste batteries in accordance with local environmental regulations.
Battery
connections
To connect the battery:
1. Place all electrical switches in the OFF position.
2. Connect the red positive (+) battery cable to the battery.
3. Connect the black negative (-) battery cable to the battery.
To disconnect the battery:
1. Stop the engine.
2. Place all electrical switches in the OFF position.
3. Disconnect the black negative (-) battery cable from the battery.
4. Disconnect the red positive (+) battery cable from the battery.
Maintaining
battery
condition
■ Follow the battery manufacturer’s maintenance recommendations.
■ Keep battery terminals clean and connections tight.
■ When necessary, tighten the cables and grease the cable clamps with
petroleum jelly.
■ Maintain the battery at full charge to improve cold weather starting.
WARNING
Explosion hazard. Batteries can emit explosive hydrogen gas.
► Keep all sparks and flames away from the battery.
► Do not short-circuit battery posts.
To Next Page
Loading...
Need help?
General
