wc_tx003253gb_FM10.fm
25
P 35A Operation
4.6 Starting
1. Move the choke lever to the closed position (a1).
Note: If engine is hot, set choke to open position (a2 ).
2. Turn engine switch to “ON”.
3. Press the priming bulb (b) repeatedly until fuel can be seen in the clear plastic
fuel-return tube (c).
4. Pull the starter grip (d).
5. Open choke as engine warms (a2).
6. Open throttle to operate.
4.7 Stopping
1. Reduce engine RPM to idle.
2. Turn engine switch to “OFF”.
wc_gr010245
b
a1
a2
c
d
To Next Page
Loading...
