wc_tx003254gb_FM10.fm
31
P35A Maintenance
5.3 Engine Oil
1. Drain oil while the engine is still warm.
2. Turn the engine 90° so the fuel tank is facing downward. Check that the fuel
tank cap (a) is tightened.
3. Remove the oil fill plug (b) and drain the oil into a container by tipping the engine
toward the oil filler neck (c).
Note: In the interests of environmental protection, place a plastic sheet and a
container under the machine to collect any liquid which drains off. Dispose of this
liquid in accordance with environmental protection legislation.
4. Fill the engine crankcase with recommended oil up to the level of the plug
opening (d). See Technical Data for oil quantity and type.
5. Install the oil filler plug (b).
WARNING
Most used oil contains small amounts of materials that can cause cancer and other
health problems if inhaled, ingested, or left in contact with skin for prolonged
periods of time.
► Take steps to avoid inhaling or ingesting used engine oil.
► Wash skin thoroughly after exposure to used engine oil.
To Next Page
Loading...
Need help?
General
