Maintenance RS 800 /...
wpm_tx001254gb.fm 26
5. Maintenance
5.1 Maintaining the Emission Control System
Normal maintenance, replacement, or repair of emission control devices and systems may be
performed by any repair establishment or individual; however, warranty repairs must be performed
by a dealer/service center authorized by Wacker Neuson. The use of service parts that are not
equivalent in performance and durability to authorized parts may impair the effectiveness of the
emission control system and may have a bearing on the outcome of a warranty claim.
5.2 Periodic Maintenance Schedule
The chart below lists basic engine maintenance. Refer to the engine
manufacturer’s Operation Manual for additional information.
Honda
Daily
before
starting
After
first
20 hrs.
Every
50
hrs.
Every
100
hrs.
Every
300
hrs.
Check the fuel level.
Check the engine oil level.
Inspect the air filter. Replace as
needed.
Check the external hardware.
Clean the air cleaner element.*
Inspect the shockmounts for damage.
Change the engine oil.*
Clean the sediment cup or fuel
strainer.
Check and clean the spark plug.
Check and adjust the valve clearance.
Clean the fuel tank.*
Check condition of the fuel line.
Replace when necessary.
*Service more frequently in dusty conditions.
To Next Page
Loading...
Need help?
General
