Maintenance RS 800 /...
wpm_tx001254gb.fm 28
Lubricate the exciter bearings (d) every 100 hours of operation. Rotate
the drum until the grease fittings are available through the holes shock
mount plates. Use a quality wheel bearing grease. Add 2–3 shots of
grease with a hand-held grease gun. Do not over grease.
Lubricate the clutch bearings (e) every 100 hours of operation. The
grease fitting is located on the clutch shift collar. Use a quality wheel
bearing grease. Add 2–3 shots of grease with a hand-held grease gun.
Do not over grease.
wc_
r003494
a
b
f
c
d
e
To Next Page
Loading...
