WM 80 Repair Carburetor Overhaul
wc_tx000522gb.fm 83
Continued from the previous page.
7.3.12 Install the screw (j), metering lever (h), pin (k), spring (g), and inlet
needle (i).
7.3.13 Install the metering diaphragm (f).
7.3.14 Install the combination valve (e) into the air purge body assembly (d),
then install the air purge body assembly.
7.3.15 Install the air purge bulb (c) and bracket.
7.3.16 Install the fuel pump diaphragm
(b).
7.3.17 Install the cover (a).
Result
The reassembly procedure is now complete.
To Next Page
Loading...
