Carburetor Overhaul WM 80 Repair
82 wc_tx000522gb.fm
Continued from the previous page.
7.3.7 Install the shutter (t) (butterfly).
7.3.8 Install the spring and washer on the choke shaft, then install the
choke shaft (r) into the carburetor body.
7.3.9 Align the spring (ee) as shown, then secure the choke shaft with
retaining ring (q).
7.3.10 Install the spacer (p), washer (o), lever (n), with screw (m).
7.3.11 Install the shutter
(l) (butterfly).
This procedure continues on the next page.
To Next Page
Loading...
