Wacker Neuson WM 90 - Installing Blower Housing and Recoil Starter

Reassembly Procedures WM 90 Repair
wc_tx000389gb.fm 68
8.18 Installing Blower Housing and Recoil Starter
See Graphic: wc_gr003650
8.18.1 Install the blower housing (h) using the flange bolts (f) and cap screw
(g).
8.18.2 Install the recoil starter (b) to the housing using the bolts (a).
wc_gr003650
a
b
h
f
g