WAGNER 770 - Clean the Inlet Filter; Filter Cleaning Safety; Inlet Filter Cleaning Steps

HANDLE
HANDLE
Start
IMPORTANT: Never clean
lter by poking with sharp
object.
Perform Pressure
Relief Procedure
Page 7
4. Remove inlet lter from
hopper
3. Empty material from hopper into original material container
7. To resume painting follow:
Load Material and
Get Material to Flow
instructions
Page 8-9
INLET FILTER
Clean
the Inlet
Filter
What you’ll need
•Original material container
•Warm, soapy water for latex
material
•Mineral spirits for oil based
materials
5. Clean inlet lter using appropriate cleaning
solution; warm, soapy water for latex material
and mineral spirits for oil based materials
6. Replace inlet lter
REPLACE
The sprayer can
be heavy when
lled with spraying
material. Make sure
to lift with your legs
and not your back in
order to reduce the
risk of injury.
1
3
4
2
5 6
English
14
Tips if Experiencing Spray Issues • Clean the Inlet Filter
Tips if Experiencing Spray Issues