HOPPER LID
5. If your break is more than an hour slowly pour
½ cup of water of paint in hopper. This helps
prevent paint from drying and causing possible
clogs
6. Place lid on hopper and keep sprayer out of
sun
Instructions are for latex material only
Note: If using oil based material follow instructions for
Cleanup and Storage on page 18
This procedure should be used when taking a short term
break or when ending your project for the day. If your break
is longer than 16 hours follow instructions for Cleanup and
Storage on page 18
Shut Down
and Short Term
Storage
What you’ll need
•Water
•Plastic bag or bucket
•Rags
Start
4. Place spray gun in plastic bag or immerse into bucket of water
Perform Pressure Relief Procedure
Page 7
To Next Page
Loading...
Need help?
General
