WAGNER AC 4600 - Starting-Up; General Rules for Handling the Spray Gun

19
AC 4600 Pro
B_02700
OPERATING MANUAL
EDITION 02/2009
PART NO. DOC394871
5.3 STARTING-UP
Trigger safety catch in on
(safe) position
Air
Material
5.3.1 GENERAL RULES FOR HANDLING THE SPRAY GUN
➞ Observe general safety instructions in chapter 2.
CAUTION
Cleaning agent in the air duct!
Functional faults caused by swollen seals
Always point the spray gun down when cleaning.
Ensure that neither paint nor cleaning agent enters the air duct.
SIHI_0005_GB
SIHI_0065_GB
WARNING
Unintentional putting into operation!
Risk of injury
Before all work on the unit, in the event of work interruptions and
functional faults:
Switch off the energy/compressed air supply.
Relieve the pressure from the spray gun and unit.
Secure the spray gun against actuation.
By functional faults: Identify and correct the problem, proceed
as described in chap„Trouble shooting“.