33
C_00157
B_04104
10
2
10
OPERATING MANUAL
VERSION 11/2015 ORDER NUMBER DOC2333553
Before every start-up, the following points should be observed as laid down in the operating manual:
- Check the permissible pressures.
- Check all connections for leaks.
- Check hoses for damage.
It should be ensured that the device is in the following state before carrying out any work on it:
- Interrupt the air supply (2).
- Depressurize the air motor (pull the ring on the safety valve (10)).
- Relieve the pressure from the uid section.
closed
open
To Next Page
Loading...
