WAGNER EvoMotion 20-30 - CE Declaration of Conformity; Notes on National Regulations and Guidelines

70
OPERATING MANUAL
VERSION 11/2015 ORDER NUMBER DOC2333553
EvoMotion
20-30
14.3 CE DECLARATION OF CONFORMITY
EC Certi cate of Conformity
The CE certi cate of conformity is enclosed with this product. If needed, further copies
can be ordered through your WAGNER dealer by specifying the product name and serial
number.
Order number: 2312813
Herewith we declare that the supplied version of pneumatic pumps and their spraypacks:
complies with the following guidelines:
2006/42/EC 94/9/EC
Applied standards, in particular:
DIN EN ISO 12100: 2010 DIN EN ISO 13732-1: 2008 DIN EN 13463-1: 2009
DIN EN809: 1998+A1: 2009+AC: 2010 DIN EN14462: 2005+A1: 2009 DIN EN 13463-5: 2011
DIN EN ISO 4413: 2010 DIN EN12621: 2006+A1: 2010 DIN EN ISO/IEC 80079-34: 2011
DIN EN ISO 4414: 2010 DIN EN 1127-1: 2011
Applied national technical standards and speci cations, in particular:
DGUV regulation 100-500
Identi cation:
T3: Without dry running protection.
T4: With dry running protection.
14.4 NOTES ON NATIONAL REGULATIONS AND GUIDELINES
Plant Safety Ordinance
Painting rooms and equipment
Equipment for cleaning work pieces with solvents
DGUV regulation
100-500
Operating working materials
e) Avoidance of ignition dangers due to electrostatic charges
f) Checking working materials and systems which require monitoring
Part 1: Checking systems in areas subject to explosion hazards and checking of work
stations in areas subject to explosion hazards
Part 3: Repairs to devices, protective systems, safety, control and regulation  xtures,
in the sense of the 94/9/EC Directive - Determination of checking necessity
according to § 14 sec. 6 BetrSichV (Industrial Safety Regulations)
Note: All titles can be ordered from Heymanns Publishing House in Cologne, or they can be found on the
Internet.