WAGNER Super Finish 33 PLUS - AC Motor Replacement

45
Super Finish 33 PLUS/PRO • Nespray Pro
3.8
REPLACING THE AC MOTOR
1. Ensure safe isolation from the supply before commencing work.
2. First disconnect the defective motor, noting the exact pin assignment.
3. Now replace the motor.
4. Observe the pin assignment noted in point 2 when connecting the individual wires.Also ensure secure contact when con-
necting the wires.
5. After completing the repair a measurement in accordance with BGV A3 must be carried out.
6. In order to exclude further use of the defective motor, all wires must be disconnected directly at the motor.
GB