WAGNER Super Finish 33 PLUS - Technical Data; Unit Specifications Overview; Key Operating Parameters

6
Super Finish 33 PLUS/PRO • Nespray Pro
Super Finish 33 Plus
(Type: D701C)
Super Finish 33 Pro
(Type: D702C)
Nespray Pro
(Type: D703C)
Voltage : 230 Volt ~, 50 Hz
Fuses : 16 A träge
Voltage on multifunction switch: 24 V - 24 V
Unit connecting line : 6 m lang, 3x1.5 mm²
Max. current consumption
unit :
heating hose :
10.7 A 7.7 A
5.2 A
Degree of protection : IP 54
Rated input of
unit :
heating hose :
2.2 kW 1.7 kW
1.1 kW
Max. operating pressure : 25 MPa (250 bar) 20 MPa (200 bar)
Max. volume ow : 4.3 l/min
Volume ow at 12 MPa (120 bar) with
water : 3.8 l/min
Max. temperature of the coating
material : 43 °C
Heating of the coating material to :
- - 40 °C (standard)
Max. nozzle size: 0.033 inch (Zoll) – 0.84 mm D319
Max. viscosity : 25,000 mPas
Empty weight
pump
heating hose drum
50 kg
-
44 kg
-
51 kg
18,3 kg
Hydraulic oil lling quantity : 1,1 l, Divinol HVI 15 1,0 l, Divinol HVI 15 1,1 l, Divinol HVI 15
Max. tyre pressure: 0.2 MPa (2 bar), 1.5 bar recommended
Plug connection on device:
max. connection
230 Volt ~, 50 Hz
1200 Watt -
230 Volt ~, 50 Hz
1200 Watt
Max. vibration at the spraygun : lower than 2.5 m/s²
Max. sound pressure level: 76 dB (A)*
*Messort: Abstand 1m seitlich vom Gerät und 1,60m über dem Boden, 12 MPa (120bar) Betriebsdruck, schallharter Boden
GB
2 TECHNICAL DATA