WAGO 852 Series User Manual

16 Device Description WAGO ETHERNET Accessories 852
852-111 Industrial ECO Switch
Manual
Version 1.3.1
4 Device Description
The 852-111 has 5 ports with each port featuring Autonegotiation and auto
MDI/MDI-X detection.
Existing 10 Mbit/s networks can now be upgraded effortlessly to higher speed
100 Mbit/s Fast ETHERNET networks. The 852-111 5-port density can be used
to create multiple segments to alleviate client congestion and provide dedicated
bandwidth to each user node.
The 852-111 is a cost-effective solution to keep up with the constant demands for
emerging IP-based industry communication needs. The switch can be easily
configured and installed and is also ideally suited for small to medium-sized
networks.
Other key features are:
• Five (5) 10/100BASE-TX Ports
• Comprehensive front-panel diagnostic LEDs
• Supports Auto-MDI/MDI-X
• Full/half-duplex transfer modes for each port
• Wide supply voltage range 18 … 30 V
• Store-and-forward switching method
• Integrated address Look-Up Engine, supports 2 K absolute MAC addresses
• Supports surge protection
• Power input polarity protection function
• IEEE 802.3x flow control for full duplex
• Auto negotiation on all ports
• Rugged metal-IP30 case
• Vibration/Shock operational

WAGO 852 Series Specifications

General

Model	852 Series
Category	Switch
Ports	8, 16
Data Rate	10/100 Mbps
Power Supply	24 VDC (typically)
Mounting Type	DIN rail
Switch Type	Managed