Wali M003 - User Manual

M003
WARNING
！
！
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
Triple Monitor Desk Mount
75x75\100x100
VESA Plate
e1 (x3)
Swivel Arm
d1 (x1)
Monitor Arm
d2 (x1)
C-Clamp
b (x1)
C-Clamp Brace
c (x1)
Lower Pole
a1 (x1)
Upper Pole
a2 (x1)
Wire Clip
n2 (x4)
Wire Clip
n1 (x2)
Grommet Base Plate
m (x1)
M4 Spacer
s (x12)
M8x12 Bolt
g (x2)
Nut
h (x3)
M5x14 Bolt
f (x3)
Wrench
p (x1)
Allen Key
o (x1)
M4x30 Bolt
r (x12)
M4x12 Bolt
q (x12)
M10 Bolt
i (x1)
Support Plate
j (x1)
M10 Washer
k (x1)
Spring Washer
l (x1)
Loosen the screw on the Lower Pole with Allen key 2mm o . Connect
Lower Pole to Upper Pole and tighten the screw with Allen key
2mm o to fix the two poles.
Pre-Assembly
1
INSTALLATION MANUAL
1-844-SATTLER (18447288537)
support@walielectric.com
www.walielectric.com
(10kg/22lbs)x3
RATED
MAX 27”
TIPOVER WARNING
● NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
● USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.
Supplied Parts List
Option A : Clamp Installation
1. Connect Lower Pole a and C-Clamp Brace c from the bottom using M5x14
Bolt f and tighten with Allen Key 3mm o .
Option A : Clamp Installation2 Option B : Grommet Base Installation
1. Place Lower Pole a onto Grommet Base Plate m . Connect them from the bottom using M5x14
Bolt and tighten with Allen Key 3mm .
2. Select the preferred height according to your desk thickness. Connect C-Clamp b to C-Clamp
Brace c using M8x12 Bolt g and tighten with Allen Key 5mm o . Rotate the hand knob
clockwise to fasten for stability.
Hand Knob
o
a1
c
c
c
f
o
o
o
o
o
g
g
b
b
a1
c
f
o
a1
a1
a1
a1 a2
o
o
o
a1
m
m
f
f
a2
a1
o
a2
a1
o

Summary

Safety Information

General Safety Warnings

General safety, liability, weight capacity, and improper installation warnings.

Tipover Prevention Warnings

Serious injury risks from tipover and methods to prevent it.

Pre-Assembly

Connecting Upper and Lower Poles

Connect and secure the upper and lower poles using Allen key.

Option A: Clamp Installation

Attach Lower Pole to C-Clamp Brace

Connect lower pole to C-Clamp brace with M5x14 bolt and Allen key.

Secure C-Clamp Brace to Desk

Attach C-Clamp brace to desk with M8x12 bolt and hand knob for stability.

Option B: Grommet Base Installation

Mount Lower Pole onto Grommet Base

Place lower pole onto grommet base plate and secure with M5x14 bolt.

Wali M003 Specifications

General

Brand	Wali
Model	M003
Category	Racks & Stands
Language	English