Walker R21 User Manual

Safety Instructions R21
16
3.
2.
5.
7.
6.
1.
4.
Location: RH Fender
Part Number: 8600-52
Part Number: 8600-52 (Continued)
1. Warning – read Operator’s Manual before
operating the machine.
2. Warning – wear eye and ear protection
when operating the machine.
3. Warning – thrown object hazard.
Keep bystanders away from the machine
when operating.
4. Warning – entanglement hazard.
Keep all guards in place while engine is
running.
5. Forward Speed Control
Move lever forward to increase speed; back
to stop.
6. Warning – roll-over hazard.
Do not operate on slopes greater than 15
degrees. Mow a safe distance of 5 feet (1.5
m) away from drop-offs or other hazards.
7. Throttle
Move lever forward to increase engine
speed; back to idle.

Walker R21 Specifications

General

Drive System	Hydrostatic
Cutting Height	1.5 - 4.5 inches
Engine	Kohler CH740
Engine Type	Air-cooled
Cutting Width	52 inch
Wheel Size	20 inches (rear)