Walker R21 - Page 21

R21 Safety Instructions
17
8600-14
Location: Deck Carrier Frame
Part Number: 8600-14
Warning – do not operate the machine with
the deck tilted up.
Location: Drive Belt Guard of Mower Deck
Part Number: 8600-55
Warning – entanglement and cutting/dis-
memberment hazards.
Keep away from pulleys, belts, and other
components.
Location: Deck Carrier Frame
Part Number: 1600-3
Warning – lock deck tilt-up hinge before
operating the machine.
Location: Deck Carrier Frame
Part Number 8600-57
Warning – pinch point under the lever.
Location: Deck Discharge Shield
Part Number: 5848-3
Warning – thrown object hazard.
□ Always keep the discharge shield in the
lowest position when operating.
□ Do not remove the discharge shield.
Location: Deck Belt Cover
Part Number: 1600-4
Warning - stop engine and remove ignition
key before adjusting deck cutting height.
Location: Carrier Frame
Part Number: 8600-56
Tighten blade mounting bolt to 70 lb·ft
(95 N·m).
8600-5
Location: Rear Body Near Mufer Tailpipe
Part Number: 8600-5
Warning – hot surface, do not touch.