Walker S14 - Mower Deck; Drive Belts; Frame;Body Construction

Specications
6
MODEL S14
MOWER DECK
Recommended Cut Width
36 or 42 in. (91 or 107 cm)
(Collection, SD, Mulch)
Cutting Height 1 to 4 in. (2.5 to 10 cm) in 1/2 in. (1 cm) Increments
Deck Suspension
Independent Torsion-Flex Frame with Caster Wheels and
Counterweight Springs
DRIVE BELTS
Engine Walker P/N 5234-3
Ground Drive Walker P/N 5232-1
PTO Drive Walker P/N 5234-4
SEAT
Contour-Molded, with Nylon Backed Vinyl Cover and Integral
Foam Cushion
FRAME/BODY CONSTRUCTION
Frame All Welded Unitized Steel Chassis
Body 14 Gauge Steel
Deck 11 Gauge Steel
GHS Catcher and Chutes Molded Cross-Linked Polyethylene (UV Stabilized)
NOTE: The manufacturer reserves the right to make changes in specications shown herein at any time
without notice or obligation. The specications listed are for a standard conguration tractor, and may
change with the addition of optional equipment.