EasyManua.ls Logo

Wallenstein BXTR6438 - 5.5 Fuel Level Check; 5.5.1 Refueling Safety

Wallenstein BXTR6438
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions
BXTR6438
Trailer Wood Chipper
34
5.5 Fuel Level Check
The fuel tank is in front of the engine on the right-hand side of
the machine. Volume is 9 US gal (34 L).
A
void running the tank dry. Use the appropriate grade of
fuel, and use caution to prevent spilling.
Do not smoke while
refueling.
IMPORTANT! Refer to engine manual supplied with this
machine for fuel specification.
01352
1
2
Fig. 26 – Fuel Tank
1. Fuel tank cap
2. Fuel gauge
5.5.1 Refueling Safety
Engine fuel is highly flammable. Handle with care.
Fill fuel tank outdoors.
Stop the engine before refueling. Allow engine to cool
for five minutes. Clean up spilled fuel before restarting
engine.
Do not overfill the fuel tank.
If fuel is spilled, wipe it away carefully and wait until the
fuel has dried before starting the engine.
Do not refuel the machine while smoking or when near
open flame or sparks.
WARNING!
Fuel vapors can explode causing
injury or death. Do not smoke while
refueling. Keep sparks, flames, and hot 
components away.
W027
After refueling, make sure that the fuel cap is secured to
prevent spillage.
Prevent fires by keeping machine clean of accumulated
trash, grease, and debris.
To add fuel:
1. Allow the engine and muffler to cool.
2. Clean area around fuel compartment lid. Open it and remove
cap.
3. Using a clean funnel, fill fuel tank to 1/2" (13 mm) below
bottom of filler neck to provide space for any fuel expansion.
Do not overfill.
4. Install fuel fill cap securely and wipe up any spilled fuel.

Related product manuals