Wallenstein BXTR6438 - 9. Specifications

BXTR6438
Trailer Wood Chipper
Specifications
61
Specifications Subject to Change Without Notice
9. Specications
Model BXTR6438 Trailer Wood Chipper BXTR6438B Trailer Wood Chipper
Engine
Kohler® CH980 35 hp (26 kW)
Drive System
Rotor: Dual Belt,
Auto Engage P3-protected Centrifugal Clutch
Chipper Housing Opening
(Height x Width)
7" x 11" (18 cm x 28 cm)
Capacity
7" (17 cm) diameter /11" (28 cm) slab
Chipper Hopper Opening
(Height x Width)
25" x 34" (64 cm x 88 cm)
Chipper Rotor Diameter / Weight
30" (76 cm) diameter @ 197 lb (90 kg)
Feed System
Hydraulic roller feed with electronic control system
Max Feed Rate
129 fpm (39 mpm)
Knife Type
Hardened tool steel
Number of Rotor Knives
4 segmented knives
Rollers
Dual horizontal with hydraulic drive
Discharge Hood Rotation
360°
Discharge Hood Height
100" (252 cm)
Hydraulic Tank
7 US gal (30 L)
Fuel Tank
9 US gal (34 L)
Mounting System
Trailer 2" (50.8 mm) ball and coupler
Dry Weight
2,225 lb (1 009 kg)
Dimensions
(Length x Height x Width)
Feed Table Open–148-1/2" x 64" x 100" (378 cm x 163 cm x 255 cm)
Closed–128" x 64" x 100" (326 cm x 163 cm x 254 cm)
Distance of feed roller to edge of
feed table to ground.
85" (216 cm)
Axle
5-bolt Hub Heavy Duty 2200 lb Torsion Axle
5-bolt Hub Heavy Duty 2200 lb Torsion Axle
with 7" Electric Brakes
Tire Size
ST205/75R14 Radial Tires
Features
- P3 PULSE – Electronic feed control and rapid recovery auto-reverse and auto-stop
clutch protection
- Height-adjustable 2" Ball Coupler
- EPA Emission Compliant
- Hydraulic fluid level site glass
- Fuel level gauge
- STOP—FORWARD—REVERSE—STOP – Feed roller control bar
- Lockable Fuel / Hydraulic Compartments
- Tool compartment
- Extendable two-position Trailer Tongue
- Highway trailer lights
- Electric Start, Heavy Duty Battery
- Latching Feed Table (closed position)
- Lift Assist for Feed Roller Maintenance
- Meets 2013 Worksafe BC Safety Standards