Wallenstein BXTR6438 - 6.4 Grease Points

BXTR6438
Trailer Wood Chipper
Service and Maintenance
47
6.4 Grease Points
Use a hand-held grease gun for all greasing. Pump one shot
of grease per fitting.
• Wipe grease fitting with a clean cloth before greasing to
avoid injecting dirt and grit.
• If fittings do not take grease, remove and clean them
thoroughly. Replace grease fittings as necessary.
Location Every 50 hours of operation or annually
1 Rotor Shaft Bearings
2 Upper Roller Bearings
3 Lower Roller Bearings
4 Roller Arm Pivot Bushings
5 Wheel Bearings
01587
1
1
24
3
2
4
3
5
Fig. 38 – Grease Points