WANHAO Duplicator 8 MARK I - Printer Preparation: Resin Pouring Guide; Pouring Resin into the Vat

AFTER SALES SUPPORT
86-571-23290996
support@wanhao3dprinter.com
Model : Duplicator 8 MARK I
19
7.1
In order to pour the resin into vat your need to lift the printing
platform. Press on upper icon for few times and give a good
distance between vat and printing plate. Shake the bottle continuously
before open it then pour the resin inside the vat as shown in the pictures
below.
7.0
Pouring resin