Need help?Do you have a question about the WANHAO Duplicator i3 and is the answer not in the manual?
Guides on downloading and installing Cura, emphasizing correct printer selection.
Details the process of selecting an installation folder for Cura.
Explains selecting installation components for Cura, like drivers and file types.
Guides on adding a new machine profile and selecting the correct printer model.
Steps to save G-code to an SD card and print from the printer.
Instructions for printing directly from a computer via USB.
Guides on defining head size, serial port, and baudrate in Cura.
Explains the 'Print' and 'Save G-code' buttons for starting prints.
Instructions on how to download and load custom profiles for Cura.
Setting filament diameter and flow for accurate extrusion.
Guides on accessing advanced options via Expert menu or shortcut.
Provides support contact information and website links.
Lists email, phone numbers for support/sales and official website links.
General| Build Volume | 200 x 200 x 180 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Print Speed | 10-100 mm/s |
| Extruder Quantity | 1 |
| Connectivity | USB, SD Card |
| Frame | Steel |
| Heated Bed | Yes |
| Nozzle Temperature | Up to 260°C |
| Display | LCD |
| Supported Materials | PLA, ABS |
| Technology | FDM (Fused Deposition Modeling) |
| Power Supply | 110V/220V |
| Machine Dimensions | 400 x 410 x 400 mm |
| Machine Weight | 10 kg |
| Layer Resolution | 0.1 - 0.4 mm (100 - 400 microns) |
To Next Page
