Need help?Do you have a question about the WANHAO Duplicator 4 and is the answer not in the manual?
General| Nozzle Diameter | 0.4 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Print Speed | 30 - 100 mm/s |
| Connectivity | USB, SD Card |
| Weight | 10 kg |
| Number of Extruders | 1 |
| Heated Bed | Yes |
| Bed Temperature | up to 100 °C |
| Nozzle Temperature | up to 260 °C |
| Display | LCD |
| Layer Resolution | 0.1 - 0.4 mm |
| Supported Materials | PLA, ABS, PETG |
| Frame Material | Steel |
| Print Technology | FDM (Fused Deposition Modeling) |
To Next Page
