Need help?Do you have a question about the WANHAO D12 400 and is the answer not in the manual?
Details warranty period, conditions, and exclusions for the 3D printer.
Guidelines for safe operation, power connection, and handling.
Caution about moving parts causing injury; avoid reaching inside.
Precautions for unattended operation, tools, water, and environmental conditions.
Guide for initial setup and first use of the D12 300 printer.
Guides through the essential initial setup steps for the 3D printer.
Covers initial assembly steps for printer components and securing parts.
Details installation of extruders, filament sensor, and belt tension adjustment.
Guides on connecting wires according to their corresponding connectors for proper setup.
Step-by-step guide for installing the second extruder and its components.
Explains key interface elements like load file, save toolpath, and menu bar.
Details how to use mouse actions for navigating and manipulating models in Cura.
Steps for connecting the printer to Wi-Fi and computer for remote printing.
How to resume printing after an unexpected power interruption.
Detailed steps for ensuring the heated print bed is level for optimal print quality.
Step-by-step guide on how to properly insert filament into the extruder.
General| Build Volume | 400 x 400 x 400 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Supported Materials | PLA, ABS, PETG, TPU |
| Number of Extruders | 2 |
| Nozzle Temperature | up to 260°C |
| Bed Temperature | up to 100°C |
| Frame Material | Aluminum |
To Next Page