Before you get started, please read these safety instructions.
CAUTION : WANHAO 3D Printers include moving parts that can cause injury. Never reach inside
the WANHAO 3D Printer while it is in operation, and allow time for the printer to cool down after
operation.
Do not leave the WANHAO 3D Printer unattended during operation.
Do not point sharp tools at yourself when dealing with model stripping.
During the printing process, do not have a strong collision with the printer.
In case of emergency turn off the 3D printer by unplugging the power outlet.
• The printer must not be exposed to water or rain, or the printer will be damaged.
• The printer is designed to be used in ambient temperatures, ranging from 15°C to 30°C.
• The printer is designed to be used in humidity levels ranging from 20% to 50%.
• Operating the printer outside the recommended temperatures and humidity levels
may result in low quality print models.
5
To Next Page
Loading...
