WANHAO D12 400 - Install Cura Wanhad Edition Onto Your Computer; Loading a 3 D Design into Cura; Viewing and Positioning Your 3 D Model in Cura

1. Double click the le: Wanhao-Cura-18.061
2. Follow the instruction and click install and next.
3. The software has already embedded all the basic
settings for your Wanhao D12 300.
1. Clear the platform using File > Clear platform…
2. Then, load your 3D Design le onto the platform using
File > Load model le…
3. Load any le with the following extensions: .STL, .OBJ, .
DAE, .AMF
TIP: You can load more than one le onto the platform. Cura will automatically move the
additional les to t.
NOTE: Files in grey are outside of the print area and need to be moved or scaled to t.
Changing the View:
• Zooming In/Out: Use the mouse scroll wheel
• Rotating the View: Hold down the right mouse button and move the mouse
Move Position:
Move your model to change where it is printed on the build plate. Do this by left clicking on the
model and dragging it to the desired location. The black outlined corner represents the lower left
hand corner of the Heated Print Bed on your printer.
29