WANHAO Duplicator 8 MARK I - Useful Advice and System Requirements; Tool Kit Contents; Recommended Items; Minimum Computer Requirements

AFTER SALES SUPPORT
86-571-23290996
support@wanhao3dprinter.com
Model : Duplicator 8 MARK I
11
Useful advice
Have supervision when used by a minor.
The resin is an irritant to skin and eyes. Always wear gloves when coming into contact with
the liquid resin.
The printer should be operated on a stable and level surface, preferably away from direct
ambient light and with sufcient space to be able to open doors
The tool kit contains
- D8 ash disk 16GB x1
- Dongle x1
- 2.0mm Allen key x1
- 2.5mm Allen key x1
- Funnel x1
- Scarper x1
- Bolt x2
- Power cord x1
- D8- disposable medical gloves (a set of 2) x2
Recommended items
- Gloves
- Paper towels
- industrial alcohol
- Soft brush or sponge to clean the object
- Plastic container to rinse the resin
Minimum computer requirements
- Dual Core processor or above.
- Windows or Linux OS
- Software is Compatible with Mac.
- 4 GB RAM memory or above.
D
Note: 500ml resin ( for free ) will be shipped by DHL.