Alarm > Motion Detection (Intruder Monitor)
The Motion Detection in the Web
Interface is more advanced than
in the App. User can set up to 4
detection areas and different
sensitivity. 15 corresponds to the
lower level and 55 to the mid-
level.
The IP Camera begins recording when it detects movement/audio and stops recording in 30 sec. In
this section, users can customize the motion detection feature. This feature can be set on the app or
in the web interface. Motion is detected by changes in the pixels of the images.
Please note that motion detection doesn’t work through windows. In this case we recommend to
connect an external motion sensor out of the window using the IO alarm port.
Alarm > Audio Detection (Baby Monitor)
Alarm > Alarm Action
www.wansview.com 32
To Next Page
Loading...
