Wansview Q1 - Page 33

Once the alarm is set, users will receive a notification on the smartphone (only Android) if the app
is running on the background and can choose to get:
Snapshot to Email: When an alarm is detected, the camera will send three pictures to the email
box. Users can set up to 2 recipients.
Click Mail Setting to setup the email. Check your email provider for SMTP Server and Port.
Snapshot to FTP server: When an alarm is detected, the camera will send 2 pictures to your
FTP server. Click on FTP Setting to setup FTP.
Recording to FTP server: When an alarm is detected, the camera will send a 15 sec video to
your FTP server.
Snapshot to SD/TF: When an alarm is detected, the camera will send 2 pictures to the SD card.
Recording to SD/TF: When an alarm is detected, the camera will send a 30 sec video to the
SD card.
Trigger IO Output: User can add a siren or another alarm device to the camera (wired). When an
alarm is detected, the external IO output will work. Users can choose alarm duration from 5 to 30
sec.
Trigger Preset: When an alarm is detected, the camera will focus on one of the 8 Preset spots (see
above).
Trigger Speaker: When an alarm is detected the speaker will act as a siren for the chosen
length (5-30sec).
Trigger indipendently: The alarm will be triggered for any kind of active alarm event
(Motion/ Voice/IO).
Trigger jointly: The alarm will be triggered for multiple detection at the same time
(Motion/ Voice/IO).
Alarm > Armed Time
By default alarm is armed 24h/7
days. Users can choose specific
days and time ranges.
www.wansview.com 33