Warmup 4iE - Initial Setup

Initial Setup
10
On initial power up you will have to congure the setup of your
4iE. The settings are detailed below.
Language select your chosen language
System type select your chosen heating system and enter
correct wattage you have connected
Set time manually set time
Set date manually set date
Daylight savings set daylight savings
(europe/n.america/australia/o)
Temperature format fahrenheit/celsius
Home screen style select the theme for your 4iE
Background image select the background image for your 4iE
Display brightness change the screen brightness for normal use and
standby
Audio feedback turn the ‘click’ sound on/o
Heating target control your heating using the oor/air sensor
Heating limits set the temperature limits for your oor type.
User Dened lets you set custom limits
Tari settings select single or standard/low energy tari
Set a program select between, custom, preset & or xed
temperature
Setback Temperature set a lower temperature for the thermostat to
achieve on your “away periods” or set to “o” if
no heating is required.
NOTE: Please ensure you enter the correct System Type and Wattage of
heaters connected. If a relay has been installed please set System Type as
Electric with Relay.