Warmup 4iE - Settings

18
Settings
Time
Set time Manually set time
Set date Manually set date
Daylight savings Set daylight savings
(europe/n.america/australia/o)
Heating preference
Temperature format Celsius/fahrenheit
Control air/oor Use air or oor sensor as heating target
Early Start Starts heating early so it’s up to temperature at
the right time
Display/Audio
Background Change the background screen (upload your own
via MyHeating App or by visiting my.warmup.com)
Home screen style Choose a theme for the main screen
Display brightness Change the screen brightness for normal use and
standby
Lock Set a lock code
Audio Feedback turn the ‘click’ sound on/o
Network Choose a WiFi network
Heater Settings
Heating Limits Set the temperature limits for your oor type.
User Dened lets you set custom limits
Regulator Controls the heating in 10 minute cycles. The
number you enter is the number of minutes in
a 10 minute cycle that the heating will be on
Ext Output T his allows one thermostat to control another
Probes Set the specication of the probes or set to
‘none’ to hide the probe on the homescreen
Probe application Choose if the oor probe is being used as a Floor
or Amb (ambient) sensor
Oset Set the oset of the sensors to improve accuracy
Reset This will restore all the factory default settings
Advanced Settings