WaterLogic WL Cube - Page 42

6.
With a Phillips Head Screwdriver, remove the five
screws on the electrical cover plate.
Remove the electrical cover plate.
7.
With a Phillips Head Screwdriver, remove the four
screws that attach the Selection - Dispense PCB to
the Mainframe.
Remove the Selection - Dispense PCB.
8.
With a Phillips Head Screwdriver, remove the two
screws from the faucet plate.
Remove faucet plate.
9.
With a Phillips Head Screwdriver, remove the four
screws that attach the Front Panel to the mainframe.
Remove Front Panel.
CUBE Operating, Installation, and Service Manual Page 42 - Revision: 6-23-2015