FAULT CODES
Filter Service Icon Flashing
1. Change filter. See Filter Replacement section in this manual.
2. Reset filter service timer. Reset by selecting the hot and cold icons simultaneously and
holding them for 10 seconds. The unit will beep and the filter service indicator light will
turn off once reset is complete.
Filter Timer is enabled and has reached the designated
service schedule (3, 6, or 12 months).
Audible alarm will sound for 15 seconds and Filter Service
Light will flash until reset.
Water will continue to dispense unless filter is completely
fouled and restricts output.
CUBE Operating, Installation, and Service Manual Page 66 - Revision: 6-23-2015
To Next Page
Loading...
